Connecting The Cables - Panasonic WORKIO DP-2310 Operating Instructions Manual

Safety Information

Connecting the Cables

[For DP-3510/4510/6010]
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable is defective
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
Ethernet-Token-Ring
Bridge
(Optional Order
No. UE-204006)
10Base-T/100Base-TX Ethernet Hub
14
Telephone Line Jack
Plug one end of the
telephone line cable into
the "RJ-11C" telephone
jack supplied by the
telephone company and
the other end into the LINE
jack on the left side of the
machine.
External Telephone Jack
You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
Ethernet LAN
(10Base-T/100Base-TX)
Cable (Not included)
Power Switch
After connecting all cables
and the Power Cord, turn the
Main Power Switch on the Back
and the Power Switch
on the Left Side of the machine
to the ON position.
RJ-11C
Telephone Jack