Printouts And Reports - Panasonic WORKIO DP-2310 Operating Instructions Manual

Relayed Transmission

Printouts and Reports

When you use Relayed Transmission, relay station will send the following two reports to help you check and
keep track of your faxes.
1. Relay XMT Report (COMM. JOURNAL)
When the relay station finishes transmitting to the End Receiving Station, it will send a Comm. Journal to
you when the Fax Parameter No. 143 is set to "Always" or "Inc. only", this tells you whether the
transmission was successful or not.
2. Transmission Journal
When the Relay Station receives instructions for a relayed transmission, a notification is emailed to the
registered manager (see "Setting up Your machine as an Internet Relay Station" on page 162).
Sample Relay XMT Report (COMM. JOURNAL)
************** -COMM. JOURNAL - ***************** DATE MMM-dd-yyyy **** TIME 15:00 ********
(1)
MODE = RELAYED TRANSMISSION
FILE NO.= 050 (4)
(5) (6)
STN COMM.
NO.
001 R-OK
002 R-OK
*************************************** - HEAD OFFICE
Explanation of Contents
(1) Indication of communication mode
(2) Start time of communication
(3) End time of communication
(4) File number
(5) Sequential number of the stations
(6) Communication result
(7) Key Name
(8) Telephone Number, Email Address or
Station Name of the end receiving
station
(9) Number of pages transmitted
(10) Duration of Communication
NOTE
172
(7) (8)
KEY NAME STATION NAME/EMAIL ADDRESS/TELEPHONE NO.
STOCKHOLM
ROME
: 001 to 999
: "R-OK" indicates that the Relayed XMT Request was successful.
"3-digit Info Code" (see page 211) indicates that the communication has
failed.
: 3-digit number represents the number of pages successfully transmitted.
1. If you transmit through more than one Relay Station, you will receive a separate Result Report.
(2)
START=MMM-dd 15:00
- PANASONIC -
- ****** - 201 555 1212 - *******
(3)
END=MMM-dd 15:00
(9) (10)
PAGES DURATION
001/001 00:00:15
001/001 00:00:15