Panasonic WORKIO DP-2310 Operating Instructions Manual page 112

Pre Installation Information
For the total system to work properly via LAN, certain information and additional parameters must be set.
Please contact your network administrator for the required information and connection to the LAN.
Important: Make a copy of this page and ask the Network Administrator to complete the required
information. After its returned, transfer the information to the back side of the front cover for future reference
and troubleshooting.
Company Name
Address
Dept.
City
Tel. No.
(1) IP Address:
(2) Subnet Mask:
(3) Default Gateway IP Address:
(4) Primary DNS IP Address:
(5) Secondry DNS IP Address:
(6) Email Address:
(7) SMTP Server IP Name :
(8) SMTP Auth Name :
(9) SMTP Auth Password :
(10) POP Server Name:
(11) POP User Name:
(12) POP Password:
(13) LDAP Server Name:
(14) LDAP User Name:
(15) LDAP Password:
(16) LDAP Search Base:
(17) Host Name:
(18) Default Subject:
(19) Default Domain:
(20) Selectable Domains:
1.
2.
3.
4.
5.
(21) Remote Password:
(22) Relay XMT Password:
(23) Manager's Email Address:
(24) Insert Email Text:
(25) Relay Domains (Domains Authorized for Relay Transmission):
1.
2.
3.
4.
5.
(26) Community Name (1):
(27) Community Name (2):
(28) Device Name:
(29) Device Location:
NOTE
112
Internet Parameters (See page
1. Items in Bold, depict information obtained from you Network Administrator.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names (items 7 and 10 above).
If the DNS Server is not available, change the 27/26*(DNS server address) of General Settings
to "No" (
FUNCTION GENERAL SETTINGS
Code,
OK 27/26* DNS Server Address
the IP Address of the SMTP and POP Servers.
3. If required, the MAC Address of your machine can be obtained from the 2nd page of the
General Settings List printout, by pressing
FUNCTION GENERAL SETTINGS
OK 00/31* Print General Setting 31 Print General Settings
* Certain Parameter Numbers may differ between the DP-2310/3010 and DP-3510/4510/6010
series. If you encounter two Parameter Numbers separated by a "/" and an asterisk ("*"), the
first number corresponds to (DP-2310/3010) and the second number corresponds to (DP-
3510/4510/6010).
User Information
State
Fax No.
124
or *SMTP Server IP Address:
or *POP Server IP Address:
or LDAP Server IP Address
6.
7.
8.
9.
10.
6.
7.
8.
9.
10.
.). Then the machine will prompt you to enter
09/04* Key Operator Mode 04 Key Operator Mode
Start
Zip Code
)
09/04* Key Operator Mode 04 Key Operator Mode
, Input ID Code,
OK
, Input ID