Installing The Solid Seat Insert; Installing The Solid Back Insert - Invacare 9000 JYMNI PEDIATRIC Series Owner's Operator And Maintenance Manual

OPTIONS
4. Repeat STEPS 1 - 3 for the opposite stroller handle.
NOTE: When closing a wheelchair with stroller handles,
raise or lower one (1) of the stroller handles two (2) hole
heights.
Height
Adjustment
Holes
Detent
Pin
Back Cane
NOTE: Stroller handles shown facing TOWARD the
inside of the wheelchair.
FIGURE 3 - INSTALLING/ADJUSTING STROLLER
HANDLES
INSTALLING/REMOVING THE SOLID
SEAT INSERT
Installing
Stroller Handles
1. Position the solid seat insert so that it is fully sup-
Removing
1. Firmly grasp the solid seat insert and lift it away from
INSTALLING/REMOVING THE SOLID
BACK INSERT
Installing
1. Position the solid back insert between the back canes.
2. Wrap the two (2) fastening straps around the back
Removing
1. Release the two (2) snaps securing the two (2) fas-
35
ported by the seat rails and the back edge of the solid
seat insert is touching the back canes.
the seat upholstery.
canes. Securely fasten with the two (2) snaps.
tening straps around the back canes and remove the
solid back insert.
PROCEDURE 10
O
P
T
I
O
N
S