Panasonic PT-50DL54 Technical Manual page 61

High definition dlp projection television

Hide thumbs Also See for PT-50DL54:

Table of Contents

Entry to Extended Service Mode:

10. On the remote control, press the power-on/off button (while in the service mode)

The TV will not turn off bu

55. The cross hair will remain on the screen.

Figure 55 - Extended Service Mode for H & V positioning

H & V Adjustment

11. Using the remote control's arrow (volume & channel) direction buttons, highlight

either HPOS or VPOS. Press the remote's ACTION button to select, but

pressing it a second time

12. Use the arrow buttons again to change the data. As the data changes, the cross

hatch will move horizontally or vertically.

13. With the HPOS or VPOS

line up with the notches on the bezel. Notice that the notches are difficu

and may need to be indicated by affixing small pieces of masking tape to the

frame. Never use masking tape on the screen. (Extreme care should be

avoid damaging the bezel.)

t enter the extended service mode as shown in figure

returns to the original Exte

selections, position the center cross hatch lines so they

nded Service Menu.

lt to see

taken to

Table of Contents

Pt-60dl54