Setup
Setting the Color Density
56
The printer panel provides an interface to adjust the density of the toner applied to
the media. This feature compensates for the changes in density that can occur as
environmental conditions changes, toner cartridges or the imaging unit age.
MENU
/EXIT
MENU/EXIT
Perform the following steps to adjust the color density:
1
To print a Color Calibration Page:
# Press the MENU/EXIT button on the printer panel.
Menu Mode
Test Page
$ Press the F button.
Menu Mode
Color Calibration
% Press the ENTER button.
Color Calibration
Calibration Offset
& Press the F button 5 times and the following is displayed.
Color Calibration
Calibration Test Print
' Press the ENTER button.
A Color Calibration Page will be printed.
CANCEL
CONTINUE
I
F
READY
ERORR
ENTER
ENTER