Loading Labels - Panasonic KX-P8410 Operating Instructions Manual

Setup
32
Loading an Envelope
Do not insert more than one envelope at a time. Only black text can be printed
on envelopes. For more detailed information on envelopes, refer to
Note:
B The envelope may be creased when printed.
1 Set the media thickness switch
2
Adjust the media guides to the width of the envelope.
3
Insert the envelope with the short end entering the printer first
and the printing side facing up. The edge where the stamp is
located enters the printer last.
4
Use the printer driver to select Envelope in the Paper size menu
and the Paper source menu.

Loading Labels

For detailed information on labels, refer to
1
Set the media thickness switch
2
Adjust the media guides to the width of the label sheets.
3 Insert the label sheets in the multi-purpose tray with the printing
side up and the top of the sheets enter first.
The height of labels should not exceed the limit mark on the guide.
4
Use the printer driver to select Label.
( P. 29).
page 167.
( P. 29).
page 168