Panasonic KX-P8410 Operating Instructions Manual page 145

Error Message
There was an error
writing to KXP8410GDI:
for the printer
(Panasonic KX-P8410):
The printer is not ready.
Make sure it is turned
on and online. To
continue printing, click
retry. Windows will
automatically retry after
5 seconds
Unable to Allocate
Memory!!
Can not load pclradj.dll
Check sum error!!
File ID not match!!
Resource DLL file is not
found.
Table file open error!!
Table file read error!!
Care and Maintenance
Possible Cause
BCable connection is
improper or the
printer is not ready.
BThe terminator
setting is improper.
The memory for
printing is insufficient.
The necessary file for
printing is not found.
Corrective Action
Perform the following
procedure.
1. Confirm that the
terminator is correctly
set.
2. Confirm that the printer
is ready.
3. Confirm that the printer
is correctly connected
with a SCSI cable.
4. Turn off the computer,
then turn it on again.
BClose all applications
except for the one which
controls the printer, then
print it again.
BTurn off the computer,
then turn it on again.
Print the document
again.
Reinstall the KX-P8410
software.
145