Using Plug And Play - Panasonic KX-P8410 Operating Instructions Manual

Using Plug and Play

1
Turn on the printer.
2
Turn on the computer and start Windows 95.
The New Hardware Found window is displayed for a few seconds, then the
Update Device Driver Wizard window is displayed.
3 Insert the KX-P8410 CD-ROM into CD-ROM drive.
4
Click Next> .
"Windows was unable to locate a driver for this device" is displayed.
5
Click Other Locations... .
6
Type in your CD-ROM drive name followed by :\Win95\Disk2
(example; D:\Win95\Disk2) in the Location field and click
OK .
7
Click Finish .
The Insert Disk window is displayed.
8
Click OK .
The Copying Files window is displayed.
9
Type in your CD-ROM drive name followed by :\Win95\Disk2
(example; D:\Win95\Disk2) in the Copy File from field and click
OK .
10
Click OK .
The Select SETUP.EXE window is displayed.
11
Click OK . Select SETUP.EXE included on the KX-P8410 CD-
ROM in your CD-ROM drive and then click Open .
Wait until the Panasonic KX-P8410 Utilities Welcome windows is displayed.
12
Follow the instructions on the screen to complete the installation.
After installation, restart your system.
Note:
B The Plug and Play installation procedure varies depending on the version of
Windows 95. Refer to Help in Windows 95.
Setup
43