Panasonic KX-P8410 Operating Instructions Manual page 37

Setting the SCSI ID Number
In most cases, there is no need to change the default settings.
However, if you have other peripheral devices connected in a SCSI chain, check if
their ID numbers conflict with that of the printer. Be sure to choose an unassigned ID
number.
ID number can be changed by using the SCSI ID No. switches (#1, #2, #3) [
1 below].
Table 1
SCSI ID No. switches
ID No.
#1
0
OFF
1
ON
2
OFF
3 ON
4 OFF
5 ON
6 OFF
7 ON
Setting the Terminator
The terminator setting can be changed by using the terminator switch (#4).
Terminator ON:
Terminator OFF:
#2 #3
OFF OFF
OFF OFF
ON OFF
ON OFF
OFF ON
OFF ON
ON ON
ON ON
SCSI ID No.
switches
Terminator switch
Setup
Table
37