Flat Wall Mounting Through Wall - Emerson RXi2-UP Hardware Reference Manual

RXi2-UP IPC Hardware Reference Manual
GFK-3047D
4.1.2

Flat Wall Mounting Through Wall

To mount the IPC with screws from the wall side, place drill holes in the wall. Refer to the
following figure for the positions for the holes. The thread in the enclosure is an M6 with a
usable thread length of 15 mm (0.60 in). Select the screw length so that a minimum of 10
mm (0.4 in) thread will be used and torque to 3.5 Nm (30.98 in-lb).
Figure 10: Flat Wall Mounting Through Wall
Mounting
Section 4
Oct 2021
12