Rxi2-Lp Pre-Installed Software Options - Emerson RXi2 Quick Start Manual

Note:
If the RXi2-LP IPC does not perform as described above, some
damage may have occurred during shipment, or the IPC is not configured
properly. Please contact Emerson for technical support. (Please see the
contact information provided at the end of this document.)

RXi2-LP Pre-Installed Software Options

Software
Options
RXI2-LP (No
Pre-Installed
Software)
RXi2-LP
Windows 10
RXi2-LP
Movicon.NExT
RXi2-LP
PACEdge
9
Descriptions
The user is responsible for installing an operating system
and application software. Please connect the power cable,
monitor, USB keyboard, and mouse before powering-up
the system. Please consult the RXi2-LP Hardware
Reference User Manual (GFK-3187) for details on how to
change the UEFI boot order and to install the operating
system.
The unit comes with a Windows 10 IoT operating system
pre-installed. Please connect the power cable, monitor,
USB keyboard, and mouse before powering-up the system.
Follow the on-screen instructions for configuring Windows
OS. Please consult Section Windows 10 Startup for more
details.
The unit comes with Movicon.NExT software is pre-
installed. Please connect the power cable, monitor, USB
keyboard, and mouse before powering up the system.
Please consult Section Movicon.NExT Startup for details.
The unit comes with PACEdge software pre-installed.
Please consult Section
PACEdge Startup
RXi2 - LP Industrial PC Quick Start Guide
for details.
GFK-3074F