Crosley CFDNH2218AS User's Operation Manual page 27

Using your appliance
Changing the water filter
To drink the freshest and cleanest
water from your refrigerator, change
the filter on time. To change the
water filter, follow these steps:
1. Shut off the water supply. Pull out
the cover about 1.5 cm and open.
Filter cover
2. Turn the water filter about 1/4
turn, counter-clockwise. Then pull
the water filter from the filter holder.
3.Insert the new filter into the filter holder.
Filter
4.Push the filter, and then turn it
clockwise until it locks. If you have trouble
inserting the water filter because of high
water pressure, shut off the water supply
valve.
Note
To change the water filter easily,
shut off the water supply valve.
Sometimes, it is hard to
disassemble the water filter
because impurities in the water
cause it to stick. If you are having
difficulties, grip the water filter
firmly and pull it out.
When you pull the water filter, a
little water can leak from the
opening. This is normal. To
minimize the water leaks, keep
the filter cartridge horizontal
when pulling it.
25