Table of Contents
Advertisement
Installing your new appliance
Connect Water Line to Refrigerator
IMPROTANT: If you turn the refrigerator
on before the water is connected, turn
off the ice maker.
1. You may need to purchase below
items to complete this connection. And
you may find these items sold as a kit at
a local hardware store.
a b c
a
Ferrule (Sleeve) -1 pcs
b
1/4" Compression Nut - 1 pcs
c
1/4" Water Line - 1 pcs
2. Unplug refrigerator or disconnect
power.
3. Close shut off value.
4. Thread a 1/4 " compression nut and
ferrule (sleeve) onto the free end and of
1/4" water line.
5. Insert the free end and of the 1/4"
water line into the brass fitting
attached to the water inlet on the
back of the refrigerator.
6. Slide the 1/4" compression nut over
the ferrule (sleeve) and screw the 1/4"
compression nut onto the brass ftting.
7. Confirm 1/4" water line is secure by
gently pulling on it.
8. Turn on water supply and check for
leaks, and correct any leaks.
c
1/4" Water Line
b
1/4" Compression Nut
a
Ferrule(Sleeve)
d
Brass Fitting
e
Water Inlet
15
Advertisement
Table of Contents
