Table of Contents
Advertisement
Installing your new appliance
4. You need to purchase several item
to complete this connection. You may
find these items sold as a kit at local
hardware store
Connecting to the water supply
line
1.First, shut off the main water supply.
2. Using a power drill and a 1/4'' drill bit
drill into the cold-water line and
connect the saddle-type shutoff valve.
Cold water line
Pipe clamp
Shut off Valve
3. Connect 1/4'' extension tubing to
shutoff valve outlet.
Saddle-Type Shutoff Valve
Packing Nut
Outlet Valve
4. Flush the tubing. Turn the main
water supply on and flush out the
tubing until the water is clear. Then,
shut the water off at the water valve
after about a quart of water has
flushed through the tubing.
Compression Nut
1/4" Extension
tubing
Ferrule(sleeve)
13
Advertisement
Table of Contents
