Crosley CFDNH2218AS User's Operation Manual page 22

Table of Contents

Advertisement

Display controls
Eco
You can touch this button to turn Eco
mode on and off. When you turn Eco
on, the Eco icon "
The temperature of the fridge is
automatically switched to 43°F (6°C)
and the freezer to 1°F (-17°C). When
enter Eco mode, "Super Cool" and
"Super Freeze" mode will be off. If Eco is
off, the icon will go off and the
temperature setting will revert back to
previous setting.
Water Filter
After the refrigerator has dispensed
about 1000 gallons of water, the filter
icon "
" will blink, reminding you to
replace the water filter.
The state of the water filter is calculated
by the main control board and
transmitted to the display panel. The
first time the power is switched on and
the water enters the filter, the filter state
is calculated at 99%. When the water
filter state drops to 15%, the icon "
When the filter state reaches 10%, the
icon "
" will flash. The user needs to
replace the filter and long press the Eco
Button for 3 seconds to reset the water
filter state. The filter state will then be re-
calculated to 99%.
" lights up.
" is lit.
°F/°C
When the Child Lock is off, you can touch
the "
" icon to switch between Celsius
and Fahrenheit units. The default state is
Fahrenheit display. When it is switched to
Fahrenheit, the icon "
When the Child Lock is on, the dispenser
will not work. When the Child Lock is off,
you can press the "Cubed" or "Crushed"
option to choose the type of Ice to be
dispensed, and press the "Water" button
to activate the water mode.
If you choose the function of Cubed, the
icon "
" will be illuminated, choose the
function of Crushed, the icon " " will be
illuminated, and the icon "
illuminated when Water function be
chosen.
Demo mode
Demo mode is for store display, and it
prevents the refrigerator from
generating cool air. In Demo Mode, the
refrigerator may seem like it is working
but it will not make cool air. The
indicators on the control panel will show
double "0F". To cancel this mode, press
and hold "Alarm" and "°F/°C" keys at the
same time for 3 seconds until the buzzer
beep one times and the display panel
will light for 3 seconds.
" will be on.
Dispenser control
" will be
20

Advertisement

Table of Contents
loading

Table of Contents