Auxiliary Output Control - Panasonic WV-NP472 Operating Instructions Manual

AUXILIARY OUTPUT CONTROL

Auxiliary Output Control
You can turn on or off the connected device, for exam-
ple a lamp that is connected to the AUX OUT terminal
of the camera.
1. Open the auxiliary output control window clicking
the AUX Output Control button in the main page.
2. Select the polarity to switch on or off the connected
device.
High: Supplies high voltage.
Low: Supplies low voltage.
3. Click the EXE button.
4. Click the Return button to go back to the main
page.
Note: The initial state is HIGH when the camera is
turned on.
-43-