Host Setup; System Setup - Panasonic WV-NP472 Operating Instructions Manual

Host Setup

Note: Never turn over the order: start with the host reg-
istration, and then proceed to the authentication
ON/OFF.
1. Open the Host Setup window.
2. Host Registration
• Enter the IP address of the PC.
A hostname.domainname can be entered
when using the DNS function.
• Select an access level, and click the SET but-
ton. The default setting is level 1.
1 (Administrator): Allows you to operate
setup menus and to view live and record-
ed images.
2 (Live Only): Allows you to view live and
recorded images.
3. Host Authentication
• Select ON or OFF, and click the SET button.
ON: Applies the host authentication.
OFF: Does not apply.
• Click the Delete button after selecting an
unwanted host name to cancel it.
• Click the Return button to go back to the main
page.
Notes:
• The host authentication will be carried out first,
and the user authentication will be the next if
both are set to ON.
• All users will become level 2 if both the host
and the user authentications are set to OFF.
• A host unregistered will be unable to access
the camera.
• Never turn over the order: start with the host
registration, and then proceed to the authenti-
cation ON/OFF.

System Setup

1. Open the System Setup window.
2. Time Adjustment
• Enter the month, date, year, and time.
3. LED control
• Select ON or OFF.
ON: Enables the LED to indicate the communi-
cation status at the rear panel of the cam-
era.
OFF: Disables the LED to indicate the status.
4. Click the SET & REBOOT button.
-35-