Network Setup Of The Pc - Panasonic WV-NP472 Operating Instructions Manual

Network Setup of the PC

To set up the network of the PC, first change the TCP/IP
settings of the PC to match them to the default settings
of the camera.
The following are the default network settings of the
camera.
IP address
Subnet mask
Default gateway
To access the camera, the IP address of the PC should
be "192.168.0.XXX" (where XXX should be a number
from 2 to 254 except 10).
Note: The following procedure is described based on
the assumption that the Windows XP is running on
the PC. When running an OS other than Windows
XP, see the manual included with the OS.
1. Start up your PC.
2. Click the "Start" button and select "Control Panel".
: 192.168.0.10
: 255.255.255.0
: 192.168.0.1
3. Double-click
Connections" icon.
4. Double-click the "Network Connections" icon.
5. Click "Local Area Communication", and then click
"Change settings of this connection" in the
"Network Task" menu.
-24-
the "Network and Internet