Setup From The Pc; Preparations For The Pc; Connections - Panasonic WV-NP472 Operating Instructions Manual

SETUP FROM THE PC

PREPARATIONS FOR THE PC

Connections

Prior to connections, specify the connection type and
prepare relevant devices and cables.
Notes:
• We recommend that you use connection type 1 or
type 2 when setting up the network address of the
camera.
• Be sure to unplug or switch all the devices off, then
start connections.
Direct Connection to PC (Type 1)
Use a cross-type network cable in the category 5 to
connect the camera directly with the PC.
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
A B
VIDEO OUT
POWER
DC 12V
RCV IN
10BASE-T/
100BASE-TX
LINK
Network Cable (Cross type)
Necessaries: Cross-type network cable (Category
5)
Connection to Intranet (Type 2)
A switching hub connected to the intranet is placed
between the camera and the PC.
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
A B
VIDEO OUT
POWER
DC 12V
RCV IN
10BASE-T/
100BASE-TX
LINK
Network Cable
(Straight type)
Switching Hub
Necessaries:
• Straight-type network cable (Category 5)
• Switching hub or router (10BASE-T/100BASE-
TX applicable)
The PC accesses the camera through the Internet and
the DSL/CATV modem.
A switching hub or a router may be added to type 3
connection.
PC
PC
(16 clients maximum)
Notes:
-23-
Connection to Internet (Type 3)
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
A B
VIDEO OUT
POWER
DC 12V
RCV
IN
10BASE-T/
100BASE-TX
LINK
Network Cable
(Straight type)
Internet
DSL/CATV Modem
Necessaries:
• Straight-type network cable (Category 5)
• CATV modem (cable modem) or DSL modem
Connection to Internet (Type 4)
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
A B
VIDEO OUT
POWER
DC 12V
RCV IN
10BASE-T/
100BASE-TX
LINK
Network Cable
(Straight type)
Switching Hub or Router
DSL/CATV Modem
Necessaries:
• Straight-type network cable (Category 5)
• CATV modem (cable modem) or DSL modem
• Switching hub or router (10BASE-T/100BASE-
TX applicable)
• Setting the router is required when connecting
more than one camera. Refer to the manual includ-
ed with the router.
• The camera does not support the PPPoE. Use a
router that handles PPPoE when connecting the
camera using that protocol.
• A global-type IP address is required when con-
necting via the Internet.
PC
(16 clients maximum)
PC
(16 clients maximum)
Internet