Table of Contents
Advertisement
5. Q & A
A:1.Start the Win 95 then plug the LAN/Modem card into the
PCMCIA slot. The SystemSoft Cardwizard window
should appear.
2.Select the appropreate slot number which the
LAN/Modem card is plugged in.
3.Select View pull down menu
4.Select Properties.
5.Select Drivers in Properties.
6.Select Change Card Driver to active the selective items
above it.
7.Select Use Plug and Play.
8.Press OK. Win 95 will request to withdraw the card.
9.Insert the card again.
10.Follow the instruction to insert the diskette and input the
path A:\ for LAN/Modem driver.
11.Add client and service as you wanted by Network Icon in
Control Panel.
12.Reboot the system
Q: The Netware driver runs successfully but fails to login
on to the Netware server
C: Frame type imcompatiable with server.
A: The default frame type for Netware 3.11 and before is
802.3 but it changed to 802.2 in Netware 4.x and 3.12. You
may check the content of NET.CFG to see if the frame type
is accepted by the server or not. If the frame type can not be
accepted by server, edit NET.CFG to change the frame type
at client site or add the frame type which can be accepted at
sever site.
5-8
LAN + Fax/ Modem PC Card
Advertisement
Table of Contents
