Table of Contents
Advertisement
\J1
Force the DTE interface speed to the
DCE connection rate (line speed) after
on-line
\Nn
Error control mode options
\N0
Buffered mode, no error control (flow
control is allowed)
\N1
Direct mode, no error control (no flow
control is allowed)
\N2
MNP reliable mode. If MNP 2-4 error
control establishment fails, the modem
disconnects
\N3 *
V.42, MNP or buffer mode. The modem
attempts to connect in V.42 mode. If this
fails, the modem attempts to connect in
MNP mode. If this fails, the modem
connects in buffer mode
\N4
V.42 or disconnect. The modem attempts
to connect in V.42 mode. If this fails, the
call will be disconnected
\Qn
Local flow control options
\Q0
Disable flow control (same as "AT&K0")
\Q1
XON/XOFF software flow control (same
as "AT&K4")
\Q3 *
RTS/CTS hardware flow control (same as
"AT&K3")
\Tn
Set inactive timer (for buffer mode only)
n=0 *
Disable inactive timer
n=1 -
Enable inactive timer. Length in minutes
255
\Vn
Protocol result codes
\V0
Disable protocol result code appended to
DCE speed
\V1 *
Enable protocol result code appended to
DCE speed
*: Manufacturer default
PLANET ENW-3503 User's Manual
Appendix C
8-7
Advertisement
Table of Contents
