Table of Contents
Advertisement
2 INSTALLATION
Note: If problems occur during removing the
COM ports, check if the NT has been
updated to the lastest release from Microsoft.
-- after all serial port devices are removed, press
Close
Add PCMCIA to Your Laptop
1. Open Program Manager à Main group à
Control Panel à Devices
2. Select PCMCIA
3. Press STARTUP
4. Select BOOT, then press OK
5. When all PCMCIA adapters are added, press
Close and restart Windows NT
Check Event Viewer when system reboots. Ask your laptop
dealer for help if any problems occur during the pre-
installation.
ENW-3503 PC Card Installation in NT 3.51
1. Insert the Ethernet + /Fax/Modem multifunction
PC Card into one of the PCMCIA slots
2. Run Windows NT
3. Login with a full access level i.e.
ADMINISTRATOR
4. Open Program Manager à Main group à
Control Panel à Network
5. Press YES to install network components
6. Enter the correct path for NT installation media (
CD-ROM). For example, D:\i386.
7. Press "Do not detect for the network adapter"
8. Open the Network Adapter Card selection box
9. Select <OTHER> REQUIRES DISK FROM
MANUFACTURER
2-8
LAN + Fax/ Modem PC Card
Advertisement
Table of Contents
