Table of Contents
Advertisement
2 INSTALLATION
2.Select Packet Driver from the menu screen.
3.Check the card settings. If current settings are correct, select
Start Installation and go to step 5. Otherwise, select
Modify Parameters to change settings.
4.Select the appropriate values then press Enter. When you
are finished, press OK to exit.
5.Installation program starts installing drivers and
modifying AUTOEXEC.BAT. Select Yes then
press Enter to modify the files.
6.Now, the installation is completed.
7.Reboot the computer to load driver.
2.2.4. Windows for Workgroups 3.11 Installation
1. Run INSTALL.EXE in root directory of ENW-3503 PC
Card driver disk.
2. Select Windows for Workgroup in Network
Operating System screen.
3. If current settings are accepted, select Start
Installation and go to step 13. Otherwise, select
Modify Parameters to make modifications.
4. Move cursor to the setting you want to make a
change for then press Enter to select a fit value.
When the configuration is accepted, press Enter
on the OK field to exit the screen and go back to
step 3.
5. Select NDIS Server (LAN Manager,...) as the
network server that you will attach to then press
Enter.
6. Installation program starts installing drivers and
modifying AUTOEXEC.BAT. Select Yes then
press Enter to modify the files.
7. Run Windows for Workgroups and click
Network Setup icon in Network group.
8. In Network Settings dialog box, click Networks... button
to select the network operating system.
2-6
LAN + Fax/ Modem PC Card
Advertisement
Table of Contents
