Push-To-Talk (Ptt); Ptt Call To A Single Device - AT&T CL83210 Abridged User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages to the speakerphone of
any device. Press and hold PTT on a handset or
on the telephone base to begin two-way communication.
Only one device can talk at a time. To do so, press and
hold PTT on the handset or
base.
You must release PTT on the handset or
/PTT on the telephone base, so the other
FLASH
person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other
devices cannot use the intercom feature but
can access the answering system.
1. Press PTT when the handset is not in use. The PUSH TO TALK menu displays.
2. Press or
CID
3. Press or
CID
1. Press /PTT when the telephone base is not in use. The PUSH TO TALK
FLASH
menu displays.
2. Press or
CID
3. Press or
CID

PTT call to a single device

1. There are a few ways to begin a PTT call to a single device. When the handset
is not in use:
If you have one handset, press and hold PTT.
If you have more than one handset, press PTT on the handset. Press
or to choose the destination handset number and press
DIR
/SELECT or PTT.
MENU
2. Press and hold PTT.
3. Release PTT after speaking.
4. To end the PTT call, press OFF/
base or charger.
FLASH
to choose
DIR
to choose On or
DIR
to choose
DIR
to choose On or
DIR
FLASH
/PTT on the telephone
, then press
, then press
, then press
, then press
or place the handset in the telephone
CANCEL
35
/PTT
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
CID