Preparing The Server For Operation - HP ProLiant ML30 Gen10 User Manual

Preparing the server Preparing the server for operation
Procedure Procedure
1. Install any options or cables previously removed to access the TPM connector.
2. If removed, install the air baffle .
3. Install the access panel .
4. Install the front bezel .
5. Do one of the following:
If the server is in tower mode: Position the tower server for operation .
If the server is in rack mode: Install the server on the tray .
6. Connect all peripheral cables to the server.
7. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
8. Power up the server .
The installation is complete.
for operation

Preparing the server for operation

149