Enabling The Trusted Platform Module - HP ProLiant ML30 Gen10 User Manual

Enabling the Trusted Platform Module

Enabling the Trusted Platform Module
When enabling the Trusted Platform module, observe the following guidelines:
By default, the Trusted Platform Module is enabled as TPM 2.0 when the server is powered on after installing it.
In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0 (default) or TPM 1.2.
In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM 1.2 and TPM 2.0 (default), but only
TPM 1.2 operation is supported.
Enabling the Trusted Platform Module 150