Installing The Tower-To-Rack Conversion Kit - HP ProLiant ML30 Gen10 User Manual

Installing the tower-to-rack conversion kit

Installing the tower-to-rack conversion kit
Use the tower-to-rack conversion kit to switch the tower server to rack mode operation. In this procedure, left and right terminology is
from the perspective of a user facing the front of the rack.
Procedure Procedure
1. Review the rack warnings and cautions .
2. If the server is used in tower mode, prepare the server for rack installation .
3. Install the rack rails and server tray.
4. Install the server on the tray .
Installing the tower-to-rack conversion kit 64