Palm Treo 700p User Manual page 312

4.
(Optional) Select Advanced, enter up to three numbers that you can dial
when your phone is locked, and then select OK. You do not need to enter
911 as one of the three numbers, because this number is always available.
5.
Select one of the following Phone Lock options:
On phone power off locks your phone each time you turn it off. When this
setting is active, you must enter your lock code each time you turn your
phone on again.
Immediately locks your phone when you select OK. The next time you
dial a number, you must enter your lock code to unlock your phone.
After that, you can continue to make calls without entering your lock
code, unless you select one of the phone lock options.
6.
When prompted, enter the lock code, and then select OK. (Unless you
changed your lock code, it is the last four digits of your phone number.)
7.
If you want to change the lock code, select Change Lock Code, enter a new
lock code, and then select OK. Repeat this step to verify the new lock code.
8.
Select OK. If you selected Immediately in step 5, your phone locks right away.
If you selected On phone power off, your phone locks the next time you press
and hold Power/End
To disable the current Phone Lock settings:
1.
Press Phone
2.
Open the menus
3.
Select Options, and then select Phone Lock.
4.
Uncheck the On phone power off box and enter your lock code to change this
setting.
5.
Select OK twice.
300
to turn off your phone.
.
.
Section 6B: Customizing Your Device