Palm Treo 700p User Manual page 285

Synchronizing Over a Bluetooth Connection
1.
Go to Applications
2.
Select Local.
3.
Select the pick list below the HotSync icon, and
then select the name of the PC you set up for
Bluetooth synchronization (see "Setting Up a
Bluetooth Connection for Synchronization" on
page 271).
4.
Select the HotSync icon
When synchronization is complete, a message appears at the top of your device
screen. Be patient; synchronization may take a few minutes.
Synchronizing Over an Infrared Connection
When you synchronize using your device's IR port, you don't need your cable. This
is especially useful if you travel with an IR-enabled laptop.
Your computer must include the following:
Your computer must have an enabled IR port and driver, or an IR device that is
attached to it. Check your computer's documentation to see if the computer
supports IR communication.
HotSync manager must be active. On a Windows computer, you know HotSync
manager is active when its icon
screen.
Section 6A: Managing Files and Applications
and select HotSync
on your device.
appears in the lower-right corner of your
.
273