Palm Treo 700p User Manual page 189

Accepting a Connection From Another Bluetooth Device
1.
To prepare your Treo device to be able to accept a connection from a
requesting device, enter the basic Bluetooth settings as described in
"Entering Basic Bluetooth Settings" on page 174.
2.
Enter the same passkey on your Treo device and on the Bluetooth device.
Important:
3.
Select OK.
Note:
Section 3F: Using Bluetooth® Wireless Technology and Dial-Up Networking
Some Bluetooth devices, such as headsets and GPS receivers, may have a
built-in passkey; other devices may provide a screen where you enter the
passkey. We recommend that you use a passkey of 16 digits, where
possible, to improve the security of your Treo device. The longer the
passkey, the more difficult it is for the passkey to be deciphered. If the
Bluetooth device has a built-in passkey, see the device's documentation
for the passkey.
Make sure you close the Bluetooth application after you set up devices
and partnerships.
177