On a Windows computer:
1.
On your computer, click the HotSync manager icon
in the taskbar in the lower-right corner of your
screen. Make sure that Infrared is selected.
2.
On your device, go to Applications
HotSync
3.
Select Local.
4.
Select the pick list below the HotSync icon and
select IR to a PC/Handheld.
5.
Position the IR port of your device within a few inches of the IR port of your
computer.
6.
Select the HotSync icon
When synchronization is complete, a message appears at the top of your device
screen. Be patient; synchronization may take a few minutes.
On a Mac computer:
1.
Double-click the HotSync manager icon
2.
From the HotSync Controls tab, select Enabled.
3.
Click the Connection Settings tab, and then check the On box next to IR port.
4.
Close the HotSync Software Setup screen.
5.
On your device, go to Applications
6.
Select Local.
274
.
on your device.
and select
in the Palm folder.
and select HotSync
Section 6A: Managing Files and Applications
.