Hoover HODP0007BI User Instructions page 2

General Safety Indication
• During cooking, moisture may condense
inside the oven cavity or on the glass of the
door. This is a normal condition. To reduce this
effect, wait 10-15 minutes after turning on the
power before putting food inside the oven. In
any case, the condensation disappears when
the oven reaches the cooking temperature.
• Cook the vegetables in a container with a lid
instead of an open tray.
• Avoid leaving food inside the oven after
cooking for more than 15/20 minutes.
• WARNING: the appliance and accessible
parts become hot during use. Be careful not to
touch any hot parts.
• WARNING: the accessible parts can
become hot when the oven is in use. Children
must be kept at a safe distance.
• WARNING: ensure that the appliance is
switched off before replacing the bulb, to avoid
the possibility of electric shocks.
• WARNING: in order to avoid any danger
caused by the accidental resetting of the
thermal interruption device, the appliance
should not be powered by an external switching
device, such as a timer, or be connected to a
circuit that is regularly switched on and off.
• Children under 8 must be kept at a safe
distance from the appliance if not continuously
supervised.
• Children must not play with the appliance.
• The appliance can be used by those aged 8
or over and by those with limited physical,
sensorial or mental capacities, without
experience or knowledge of the product, only
if supervised or provided with instruction as to
the operation of the appliance, in a safe way
with awareness of the possible risks.
• Cleaning and maintenance should not be
carried out by unsupervised children.
• Do not use rough or abrasive materials or
sharp metal scrapers to clean the oven door
glasses, as they can scratch the surface and
cause the glass to shatter.
• The oven must be switched off before
removing the removable parts and, after
cleaning, reassemble them according the
instructions.
• Only use the meat probe recommended for
this oven.
• Do not use a steam cleaner for cleaning
operations.
• Connect a plug to the supply cable that is
able to bear the voltage, current and load
indicated on the tag and having the earth
contact. The socket must be suitable for the
load indicated on the tag and must be having
the earth contact connected and in operation.
The earth conductor is yellow-green in colour.
This operation should be carried out by a
suitably qualified professional. In case of
incompatibility between the socket and the
appliance plug, ask a qualified electrician to
substitute the socket with another suitable
type. The plug and the socket must be
conformed to the current norms of the
installation country. Connection to the power
source can also be made by placing an
omnipolar breaker between the appliance and
the power source that can bear the maximum
connected load and that is in line with current
legislation. The yellow-green earth cable
should not be interrupted by the breaker. The
socket or omnipolar breaker used for the
connection should be easily accessible when
the appliance is installed.
• The disconnection may be achieved by
having the plug accessible or by incorporating
a switch in the fixed wiring in accordance with
the wiring rules.
• If the power cable is damaged, it must be
substituted with a cable or special bundle
available from the manufacturer or by
contacting the customer service department.
• The type of power cable must be H05V2V2-F.
• This operation should be carried out by a
suitably qualified professional. The earth
conductor (yellow-green) must be approximately
10 mm longer than the other conductors. For
any repairs, refer only to the Customer Care
Department and request the use of original
spare parts.
• Failure to comply with the above can
compromise the safety of the appliance and
invalidate the guarantee.
• Any excess of spilled material should be
removed before cleaning.
• A long power supply failure during an
occurring cooking phase may cause a
malfunction of the monitor. ln this case contact
customer service.
• The appliance must not be installed behind a
decorative door in order to avoid overheating.
• When you place the shelf inside, make sure
that the stop is directed upwards and in the
back of the cavity.
The shelf must be inserted completely into the
cavity
• WARNING: Do not line the oven walls with
aluminum foil or single-use protection
available from stores. Aluminum foil or any
other protection, in direct contact with the hot
enamel, risk melting and deteriorating the
enamel of the insides.
• WARNING: Never remove the oven door seal.
• CAUTION: Do not refill the cavity bottom with
water during cooking or when the oven is hot.
• No additional operation/setting is required in
order to operate the appliance at the rated
frequencies.
EN 02