Indoor Use; Using The Pow Er Pack - JVC GR-DLS1 Instructions Manual

12
EN

Indoor Use

When using the camcorder indoors, you can use the AC Power Adapter/Charger instead of a battery.
To AC outlet
Power lamp
W hen power is
supplied, the
power lamp lights.
SUPPL Y PO W ER TO ADAPTER
1
Plug the AC Power Adapter/Charger's power
cord in to an AC outlet.
SUPPL Y PO W ER TO CAM CO RDER
2
Connect the AC Power Adapter/Charger to the
camcorder.

Using The Pow er Pack

For extended use, prepare the provided Power Pack, which can be loaded with one battery pack. This Power
Pack can be used together with the battery installed in the camcorder.
Connector
Screw
Downloaded from:
Power cord
To D C O U T jack
Battery cover
Knob
Battery
Screw head
https://www.usersmanualguide.com/
GETTING STARTED
AC Power
Adapter/ Charger
D C cord
N O TE:
When using the provided DC cord, make sure you
connect the end of the cable with the core filter to
the camcorder. The core filter improves perform-
ance of equipment.
1 IN SERT CHARGED BATTERY
Open the battery cover while pressing the
knob and insert the
first. Close the battery cover.
2 ATTACH TO CAM CO RDER
Align the connector and screw on the Power
P ack while inserting the camcorder connector.
Turn the spring-loaded screw head at the
Power Pack's bottom inward and turn it
clockwise to attach.
• To detach the Power P ack, turn the screw
counterclockwise.
N O TES:
● When the battery remaining power indicator
M ark
appears as
close to nil. When the battery power is exhausted,
power turns off automatically.
● Each time you start shooting, the camcorder
chooses the battery pack that has more remaining
power, and uses that as the power supply. That
means both battery packs will be exhausted at
roughly the same time.
Connector is
under the cover
DC-IN
end of the battery
, that means the battery power is
(Cont.)
Core
Filter