JVC GR-DLS1 Instructions Manual page 40

40
EN
Picture W ipe/ Dissolve
Combine the Picture Wipe and Dissolve functions for a professional transition effect. There are 6 Picture
Wipe effects and 1 Dissolve effect. Select the Picture Wipe effect at the Fader/Wipe Menu (
Select any one effect from
START/ STO P button
1 START RECO RDIN G
Press START/ STO P .
2 EN GAGE RECO RD-STAN DBY M O DE
Press START/ STO P when one scene is finished.
The point at which the scene ended is stored in
memory.
RESUM E RECO RDIN G
3
If you start recording a new scene within 5
minutes of the end of the previous recording
(without having turned the camcorder's power
off), the previous scene wipes out, revealing
the new scene.
Downloaded from:
P P
, ,
https://www.usersmanualguide.com/
RECORDING
P P
P P
, , , and
Previous scene end
Within 5 minutes . . .
W ipe In
N O TES:
● If the power is turned off after a scene is finished
recording, the stored point is erased.
This disables the Picture Wipe/Dissolve
combination. When this happens, the Picture
Wipe/Dissolve indicator blinks. Try recording
again, but don't turn the power off when you're
finished. Please be advised that power also shuts
off automatically if 5 minutes elapse in the
Record-Standby mode.
● The sound at the end of the last recorded scene is
not stored.
Advanced Features (Cont.)
P
of the Fader/ W ipe M enu.
Example
P
W IPE – SCRO LL
The next scene gradually wipes in over the
previous scene.
pg. 38).