JVC GR-DLS1 Instructions Manual page 44

44
EN
P.AE/ Effects
You can choose any one of the effects from the P .AE/Effect Menu.
FOCUS
EXPOSURE
W. BALANCE
FADER
/ WIPE
P. AE
4
/ EFFECT
RETURN
M anual M ode Item M enu
Power D ial
Lock button
SELECT O PERATIO N M O DE
1
First turn the Power Dial to " " while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
ACCESS M AN UAL M O DE ITEM
2
M EN U
Press the Select Dial and move the pointer and
highlight bar to "P .AE/EFFECT" by rotating the
Select Dial.
3 ACCESS P.AE/ EFFECT SELECT M EN U
Press the Select Dial. The P .AE/Effect Menu
appears.
SELECT EFFECT
4
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
• The P .AE/Effect Menu disappears and the
selected mode is activated. The symbol of the
selected mode appears.
Downloaded from:
D isplay
AUTO
AUTO
AUTO
OFF
OFF
https://www.usersmanualguide.com/
RECORDING
P. AE / EFFECT
SLOW SHUTTER
VIDEO ECHO
OFF
SEL. 4 SHUTTER
1/60 1/60
SHUTTER
1/100 1/100
SHUTTER
1/250 1/250
SHUTTER
1/500 1/500
P .AE/ EFFECT M enu
START RECORDIN G
5
Press START/ STO P . The image begins with the
selected effect.
6 DISABLE P.AE/ EFFECT
To turn off the selected effect, re-access the
P .AE/Effect Menu and move the pointer and
highlight bar to " OFF" by rotating the Select
Dial. Then press it.
N O TE:
P .AE/Effects can be changed during recording or
during Record-Standby.
IM PO RTAN T:
● If certain Fades or Wipes (
activated or if the Progressive Dial is set to
"VIDEO", some P .AE/Effects cannot be used. If
you select a P .AE/Effect that is unusable in the
current situation, the effect's symbol begins
flashing.
● When the Digital Image Stabilizer is activated,
the P . AE/Effects other than "SHUTTER" are not
available.
Advanced Features (Cont.)
1/60 PAUSE
The indicator for the selected
mode appears, and the selected
mode is engaged.
Select D ial
pg. 38 – 43) are