JVC GR-DLS1 Instructions Manual page 38

38
EN
FADE/ W IPE Effects
Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to
scene. Refer to pages 38 – 43 for Fade/Wipe effects and techniques.
Select any one effect from the Fader/ W ipe M enu.
FOCUS
EXPOSURE
W. BALANCE
FADER
4
/ WIPE
P. AE
/ EFFECT
RETURN
M anual M ode Item M enu
Power D ial
Lock button
SELECT O PERATIO N M O DE
1
First turn the Power Dial to " " while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
ACCESS M AN UAL M O DE ITEM
2
M EN U
Press the Select Dial.
3 ACCESS FADER/ W IPE M EN U
Move the pointer and highlight bar to " FADER/
WIPE" by rotating the Select Dial and then
press it. The Fader/Wipe Menu appears.
SELECT EFFECT
4
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
• The Fader/Wipe Menu disappears and the
effect is reserved. The indicator representing
the selected effect appears.
Downloaded from:
D isplay
AUTO
AUTO
AUTO
OFF
OFF
https://www.usersmanualguide.com/
RECORDING
FADER / WIPE
P WIPE – SHUTTER
RANDOM
? R
OFF
SEL. 4 FADER – WHITE
W
H
FADER – BLACK
B
K
FADER – B.W
B W
WIPE–CORNER
Fader/ W ipe M enu
5 START RECO RDIN G
Press START/ STO P to start recording and
activate fade- or wipe- in
O R . . .
EN D RECO RDIN G
Press START/ STO P to end recording and
activate fade- or wipe- out.
TO CAN CEL FADE/ W IPE EFFECTS
6
In step 4 , move the pointer and highlight bar to
" OFF" . Press the Select Dial.
IM PO RTAN T:
● If certain P .AE/Effects (
or if the Progressive Dial is set to "VIDEO",
some Fade/Wipe Effects cannot be used. If
you select a Fade/Wipe Effect that is unusable
in the current situation, the indication blinks.
● When the Digital Image Stabilizer is activated,
the Fade/Wipe Effects are not available.
Advanced Features (Cont.)
MANUAL
W
H
PAUSE
START/ STO P button
Select D ial
pg. 44) are activated