JVC GR-DLS1 Instructions Manual page 46

46
EN
Progressive Video Recording
If an image is recorded using the Progressive Mode, it is possible to play back a jitter-free still image with
superior quality. A high-resolution still image can also be processed on a personal computer or can be
printed out ( pg. 60, 61).
Progressive D ial
VID EO mode
Progressive Button
Power D ial
Lock button
1 SELECT O PERATIO N M O DE
Turn the Power Dial to " " , " " , " 5S" or "
while pressing down the lock button located
on the dial. Make sure the LCD monitor is
open fully or the viewfinder is pulled out.
• The power lamp comes on.
2 SELECT PRO GRESSIVE M O DE
Turn the Progressive Dial to " VIDEO" .
" PS" (Progressive Mode Display) comes on.
3 START RECO RDIN G
Press the Progressive Button located on the
Progressive Dial. The tally lamp comes on.
EN D RECO RDIN G
4
Press the Progressive Button. The camcorder
enters Record-Standby mode.
IM PO RTAN T:
● When an image recorded using the Progressive Mode is played back, the image may not look natural.
● When the Progressive Dial is set to " VIDEO" , Wipe/Dissolve (
( pg. 45) cannot be used.
Downloaded from:
Power lamp
https://www.usersmanualguide.com/
RECORDING
To Perform Pro Snapshot Recording during
Progressive Video Recording . . .
"
.... first turn the Progressive Dial to the Pro
Snapshot Mode you want, then press the
Progressive Button. To end recording, turn the
Progressive Dial to " VIDEO" , then press the
Progressive Button again.
N O TES:
● To perform Progressive Video Recording, the
Progressive Button should be pressed during
Record-Standby; it cannot be activated during
recording.
● If START/ STO P is pressed instead of the Progres-
sive Button, the camcorder starts recording using
the operation mode to which the Power Dial is set
at that moment (
pg. 43) Effects and some P .AE/Effects
Advanced Features (Cont.)
D isplay
F. AUTO
PAUSE
F. AUTO 35 min
PS REC
444
DEC 25 ' 98
PM 5 : 30
Progressive mode display
pg. 19). " PS" disappears.