Table of Contents
Advertisement
10
EN
Indoor Use
When using the camcorder indoors, you can use the AC Adapter instead of a battery.
To AC outlet
Power lamp
When power is
supplied, the
power lamp lights.
1
SUPPLY POWER TO ADAPTER
Plug the AC Adapter/Charger's power cord in
to an AC outlet.
2
SUPPLY POWER TO CAMCORDER
Connect the AC Adapter to the camcorder.
Using The Power Pack
For extended use, prepare the optional Power Pack CU-V810U, which can be loaded with one battery pack.
This Power Pack can be used together with the battery installed in the camcorder.
Connector
Screw
Downloaded from:
Power cord
To DC OUT jack
Battery cover
Knob
Battery
Screw head
https://www.usersmanualguide.com/
GETTING STARTED
AC Power
Adapter/Charger
DC cord
NOTE:
When using the provided DC cord, make sure you
connect the end of the cable with the core filter to
the camcorder. The core filter improves perform-
ance of equipment.
1
INSERT CHARGED BATTERY
Open the battery cover while pressing the
knob and insert the
first. Close the battery cover.
2
ATTACH TO CAMCORDER
Align the connector and screw on the Power
Pack while inserting the camcorder connector.
Turn the spring-loaded screw head at the
Power Pack's bottom inward and turn it
clockwise to attach.
•To detach the Power Pack, turn the screw
counterclockwise.
NOTES:
● When the battery remaining power indicator
Mark
appears as
close to nil. When the battery power is exhausted,
power turns off automatically.
● Each time you start shooting, the camcorder
chooses the battery pack that has more remaining
power, and uses that as the power supply. That
means both battery packs will be exhausted at
roughly the same time.
Connector is
under the cover
DC-IN
end of the battery
, that means the battery power is
(Cont.)
Core
Filter
Advertisement
Table of Contents
