JVC GR-DLS1 Instructions Manual page 79

1
Zoom switch or volume switch (VO L.)
( pg. 26, 52)
Adjusts zoom during recording or the sound
volume during playback.
2
Grip strap (
3
Lens hood
4
Tally lamp
Lights during recording.
5
Remote sensor (
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
6
Lens cover
Opens when the viewfinder is pulled out or the
LCD monitor is opened fully.
7
Stereo microphone (
For use when recording or audio dubbing.
8
External microphone input connector
(M IC) (Stereo) (
An optional microphone can be connected.
9
JLIP (J oint Level Interface Protocol)
(D IGITAL STILL) output connector
( pg. 60)
Outputs the digital still image to a personal
computer.
0
ED IT jack (
Using an editing cable, connect to the remote
control or VCR.
!
RESET button (
When a malfunction occurs, press this button
after removing the power supply (battery etc.).
Pressing this button also resets the date/time or
various settings.
@
Stop button (
Stops playback of the tape.
#
Play/ Pause button (
Plays back or stops the tape temporarily.
$
Rewind button (
Rewinds the tape.
%
Fast-Forward button (
Fast-Forwards the tape.
Downloaded from:
pg. 16)
pg. 54)
pg. 70)
pg. 70)
pg. 65)
pg. 76)
5 ) ( pg. 52)
/ ) ( pg. 52)
6 4
2 ) ( pg. 52)
3 ) ( pg. 52)
https://www.usersmanualguide.com/
^
Progressive D ial (PRO GRESSIVE)
( pg. 30, 46)
Turn for Progressive Video Recording or Pro
Snapshot Recording.
&
Progressive Button (
When this button is pressed, the camcorder starts
Progressive Mode Recording (high resolution).
When pressed during playback, a playback
snapshot is taken.
*
O PEN / EJECT switch (
Slide the switch down when loading/unloading a
tape.
(
Speaker ( pg. 52)
During playback, the sound can be heard.
)
PU SH -O PEN button (
Press to open the LCD monitor.
q
Power dial ( pg. 20)
Turning the camcorder on/off, recording or
playback is possible.
w
M EN U button (
Press this button to make the Menu appear.
O N / O FF button (
Press and hold this button for more than approx.
1 second to make the indications appear on the
LCD monitor or the viewfinder.
e
Function N avigator D ial (Select D ial)
( pg. 24, 33)
Adjusts the brightness of the LCD monitor or
selects the Menu etc. Referred to in this manual
as " Select Dial" .
r
START/ STO P button (
Starts recording or stops recording to make the
camcorder enter the record-standby mode.
t
Viewfinder ( pg. 17)
Pull out when recording.
79
EN
pg. 30, 46)
pg. 14)
pg. 14)
pg. 33)
pg. 24)
pg. 20)