JVC GR-DLS1 Instructions Manual page 73

SYM PTOM
10. The tape is moving, but
there's no picture.
11. In the 5-Second mode,
recording ends before
5 seconds have elapsed.
12. Pro Snapshot mode
cannot be used.
13. Digital Zoom doesn't
work.
14. P .AE/Effects and Fade/
Wipe Effects don't work.
15. The Black & White Fader
doesn't work.
16. The Dissolve function
doesn't work.
17. Scene transition does not
go as expected.
Downloaded from:
10. • Your TV has AV input
terminals, but is not set to
its VIDEO mode.
• The cassette's cover is open.
11. • The 5-Second mode in the
System Menu is set to
"ANIM." .
12. • The Squeeze mode is
selected.
13. • 10X optical zoom is selected.
• The Video Echo effect is
activated.
• Picture Wipe or Dissolve
are being used in a scene
transition.
• 5-Second recording was
done with the Power Dial
set to " 5S" , and with " 5SD"
selected in the System Menu.
• Pro Snapshot was attempted
during Digital Zoom.
14. • The Power Dial is set to
" " .
• The Power Dial is set to
" 5S" .
15. • The Sepia or Monotone
effects are activated.
16. • P .AE/Effect Sepia,
Monotone or Slow is
activated.
• The Squeeze mode is
selected.
• The previously selected
P .AE/Effect was changed
after the last selected scene
for editing was registered.
17. • When using " Picture Wipe/
Dissolve" (
" Dissolves during 5 second
mode recording" (
there is a delay of a fraction
of a second between the
previous record stop-point
and the Dissolve start-point.
This is normal, but this slight
delay becomes especially
noticeable when shooting
fast-moving subject or
during rapid panning.
https://www.usersmanualguide.com/
POSSIBLE CAUSES
pg. 40) or
pg. 28),
CORRECTIVE ACTION
10. • Set the TV to the mode or
channel appropriate for
video playback (
• Close the cassette's cover
( pg. 14).
11. • Select " 5S" or " 5SD" in the
System Menu (
12. • Disengage the Squeeze
mode ( pg. 34).
13. • Turn off the Video Echo
effect ( pg. 45).
• Wait until the Picture Wipe
or Dissolve effects are
completed ( pg. 40).
• Change the setting of either
the System Menu or the
Power Dial ( pg. 36).
• Do not attempt to take a
Pro Snapshot when
performing Digital Zoom
( pg. 28).
14. • Set the Power Dial to "
( pg. 19).
• Change the setting of the
Power Dial.
15. • Turn off Sepia and
Monotone ( pg. 44).
16. • Turn off Sepia, Monotone
or Slow before adding
Dissolve to a scene
transition ( pg. 44).
• Make sure that the Squeeze
mode in the Recording
Menu is set to " OFF"
( pg. 34).
• Make sure you have
selected the P .AE/Effects
you want before starting
editing ( pg. 44).
17.
————
CO N TIN U ED O N N EXT PAGE
73
EN
pg. 58).
pg. 37).
"