a.
Remove the four Phillips M 2.0 × 2.5 screws (1) from the display side panel brackets.
b.
Lift the top panel and rotate it onto the keyboard (2).
NOTE:
In this procedure, the display assembly will not be connected to the computer.
c.
Peel the tape off the connector on the back of the display panel (1).
d.
Rotate the wire retention latch off the connector (2).
e.
Pull the cable out of the connector (3).
Display panels are available as the following spare part numbers:
N17118-001—SVA
N17119-001—UWVA
N17120-001—UWVA, touch-on panel (TOP)
Display assembly
41