Table of Contents
Advertisement
Table 5-3
Display subcomponent descriptions and part numbers (continued)
Description
Display panel, FHD, 300 nits
Display panel, FHD, 300 nits, 144 Hz
Display panel, QHD, 300 nits, 165 Hz
Top bracket
Camera module
Before removing the display subcomponents, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the display subcomponents:
1.
Open the computer to 180° (1).
2.
Use a tool to release the top, left and right sides, and then bottom of the bezel (2).
3.
Use a tool to release the hinge cover from the computer (3).
4.
Remove the bezel (4).
NOTE:
which is available in the display adhesive kit as spare part number N14114-001.
5.
To remove the display panel:
a.
Remove the four Phillips M 2.0 × 2.5 screws (1) from the display side panel bracket.
28
Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
The bezel is secured with adhesive. When replacing the bezel, be sure to replace the adhesive,
Preparation for disassembly on page
24).
Battery on page
Spare part number
N13806-001
N13807-001
N13808-001
N14108-001
N14112-001
24).
25).
Advertisement
Table of Contents
