Table of Contents
Advertisement
2.
Remove the two Phillips M2.0 × 2.5 screws (3) that secure the antenna bracket, and then remove the
bracket (4).
3.
Lift the plastic cover that covers the connectors on system board (1). Leave the cover connected as you
remove the system board.
4.
Disconnect the following components and cables from the system board:
Top USB board cable (ZIF) (2)
●
Bottom USB board cable (ZIF) (3)
●
Display cable (ZIF) (4)
●
Wireless antenna cables from the integrated WWAN module (5)
●
One right antenna cable from rubber routing paths (6)
●
Speaker cable (ZIF) (7)
●
Keyboard cable (ZIF) (8)
●
Touchpad cable (ZIF) (9)
●
System board
35
Advertisement
Table of Contents
