Miele DGC 7150 Operating And Installation Instructions page 96

Problem solving guide
Problem
System lock  appears in
the display when the
oven is switched on.
The sensor controls do
not respond.
Power cut appears in the
display.
12:00 appears in the
display.
96
Cause and remedy
The  system lock has been activated.
 Confirm with OK.
Press "OK" for 6 secs
 You can deactivate the system lock for a cooking
process by touching the OK sensor control for at
least 6 seconds.
 If you want to permanently deactivate the system
lock, select the
You have selected the
Off setting. When the combination steam oven is
switched off, the sensor controls do not respond.
 As soon as the combination steam oven is
switched on, the sensor controls will respond. If
you want the sensor controls to always respond
even when the combination steam oven is
switched off, select the
On setting.
The combination steam oven is not connected to the
power supply.
 Check that the oven plug is correctly inserted into
the socket and switched on.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
 Touch and hold the  On/Off sensor control until
the display switches off and the combination
steam oven restarts.
There has been a brief power cut. This has caused
the current cooking process to stop.
 Switch the combination steam oven off and back
on again.
 Restart the cooking process.
The power supply was interrupted for longer than
150 hours.
 Reset the time and date.
will appear.
|
Safety System lock 
|
Display QuickTouch
Display | QuickTouch
| setting.
Off
|
|