Miele DGC 7150 Operating And Installation Instructions page 86

Cleaning and care
Preparing the descaling process
You will need a container of
approx. 1 litre capacity.
A plastic tube (with suction cup) is
supplied with your oven so that you
do not have to hold the container with
the descaling agent underneath the
water intake pipe.
We recommend using the descaling
tablets supplied. They have been
specially developed for Miele for
optimum results.
Tip: Miele descaling tablets are
available to order from the Miele online
shop, from the Miele Customer Service
Department or from your Miele dealer.
Other descaling agents, which contain
other acids besides citric acid and/or
other undesirable substances, such as
chlorides, could cause damage.
Moreover, the descaling result
required could not be guaranteed if
the descaling agent was not of the
appropriate concentration.
 Fill the container with approx. 900 ml
of cold fresh water and thoroughly
dissolve two descaling tablets in it.
86
Carrying out the descaling process
 Select
Further .
 Select
Maintenance
 Select
Descale .
If the operating modes and automatic
programmes with moisture are already
disabled, the descaling process can
be started immediately by touching
OK.
 Push the universal tray into the top
shelf level as far as it will go to collect
the descaling agent after it has been
used. Confirm the message shown
with OK.
 Attach one end of the plastic tube to
the water intake pipe.
 Place the container with the
descaling agent on the floor of the
oven.
 Place the other end of the plastic
tube in the bottom of the descaling
agent container and secure the
plastic tube to the container with the
suction cup.
 Confirm with OK.
The water intake process will begin. You
will hear the noise of the pump.
.