Miele DGC 7150 Operating And Installation Instructions page 11

Combination steam oven
Table of Contents

Advertisement

If the connection cable is damaged, it must be replaced with a
special connection cable by a Miele authorised service technician
(see "Installation", "Electrical connection").
During installation, maintenance and repair work, e.g. if the oven
interior lighting is faulty (see "Problem solving guide"), the
combination steam oven must be completely disconnected from the
household electricity supply. To ensure this, do one of the following:
- Disconnect the mains fuse
- Completely unscrew the screw-out fuse (in countries where this is
applicable)
- Pull out the plug (if one is present) at the wall socket. To do this,
pull the plug and not the mains connection cable.
The combination steam oven requires a sufficient supply of cool
air for efficient operation. Make sure that the supply of cool air is not
hindered in any way (e.g. by fitting heat insulation strips in the
housing unit). Furthermore, the required supply of cool air must not
be excessively heated by other heat sources (e.g. solid fuel stoves).
If the combination steam oven is built in behind a furniture front
(e.g. a door), do not close the furniture door while the oven is in use.
Heat and moisture can build up behind the furniture front when
closed. This can result in damage to the combination steam oven,
the housing unit and the floor. Leave the furniture door open until the
combination steam oven has cooled down completely.
Correct use
Risk of injury caused by hot surfaces and steam. The combination
steam oven gets hot during operation. You could burn yourself on
the steam, heater elements, oven compartment, accessories or food.
Use oven gloves when placing hot food in the appliance or removing
it and when working in the hot oven compartment.
Warning and Safety instructions
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgc 7250

Table of Contents