Miele DGC 7150 Operating And Installation Instructions page 88

Cleaning and care
Residual water evaporation
After the third rinse, residual moisture
evaporation and the drying process will
commence.
 Close the door.

Risk of injury caused by steam.
Steam can cause severe scalding.
Do not open the door while the
residual water is being evaporated.
The oven heating will switch on and the
duration of residual moisture
evaporation will appear. The duration is
amended automatically depending on
the actual amount of residual moisture.
Once the residual water has been
evaporated, the drying process starts
automatically to remove moisture from
inaccessible areas of the oven
compartment.
88
Finalising the descaling process
At the end of residual water
evaporation, an information window
appears with tips on cleaning after the
descaling process.
 Confirm with OK.
A buzzer sounds and
 Use the  On/Off sensor control to
switch the combination steam oven
off.

Risk of injury caused by hot
surfaces.
The combination steam oven gets
hot during operation. You could burn
yourself on the heater elements,
oven compartment or accessories.
Allow the heater elements, oven
compartment and accessories to
cool before manual cleaning.
 When the oven compartment has
cooled down, clean away descaling
agent residues.
 Leave the oven door open until the
oven compartment is completely dry.
Finished appears.