Choosing The Appropriate Paper - Kyocera ECOSYS MA6000ifx Operation Manual

Appendix > Paper

Choosing the Appropriate Paper

This section describes guidelines for choosing paper.
Condition
Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or
paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor
copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and even
surface; however, avoid coated paper or paper with a treated surface as it may damage the drum or fusing unit.
Ingredients
Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon.
Those types of paper may produce harmful fumes from the heat of printing and may damage the drum.
Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper
content consists of cotton or other fibers.
Supported Paper Sizes
Paper of the following sizes is supported by the machine.
Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner
angles must be 90° ± 0.2°.
Paper Size
Envelope Monarch (3-7/8 × 7-1/2")
Envelope #10 (4-1/8 × 9-1/2")
Envelope DL (110 × 220 mm)
Envelope C5 (162 × 229 mm)
Executive (7-1/4 × 10-1/2")
Letter
Legal
A4 (297 × 210 mm)
B5 (257 × 182 mm)
A5 (210 × 148 mm)
A6 (148 × 105 mm)
B6 (182 × 128 mm)
Envelope #9 (3-7/8 × 8-7/8")
Envelope #6 (3-5/8 × 6-1/2")
ISO B5 (176 × 250 mm)
Hagaki (Cardstock) (100 × 148 mm)
Oufuku hagaki (Return postcard) (148 × 200 mm)
Oficio II
216 × 340 mm
16K (273 × 197 mm)
Cassette 1
×
×
*1
*1
*1
×
×
×
*1
11-14
Cassettes 2 to 5 Multi Purpose
×
×
Tray