Kyocera ECOSYS MA6000ifx Operation Manual page 380

Setup and Registration (System Menu) > System Menu
Email
[Home] key > [...] > [System Menu] > [Function Settings] > [Email]
Item
Email Settings SMTP (Email
TX)
SMTP Server
Name
SMTP Port
Number
Sender
Address
SMTP Auth and
Sender
Address
POP3 POP3
Remote
Printing
Sending Job - Folder
[Home] key > [...] > [System Menu] > [Function Settings] > [Sending Job - Folder]
Item
FTP Settings
SMB Settings
Fax
[Home] key > [...] > [System Menu] > [Function Settings] > [Fax/iFax]
Configure settings for FAX.
FAX Operation Guide
Select whether to send E-mail using SMTP.
Value: Off, On
Enter the host name or IP address of the SMTP server.
NOTE
Up to 256 characters can be entered.
Specify the port number to be used for SMTP. The default port number is 25.
Value: 1 to 65535 (Port Number)
Specify the sender address for when the machine sends E-mails, such as the
machine administrator, so that a reply or non-delivery report will go to a person
rather than to the machine. The sender address must be entered correctly for
SMTP authentication. The maximum length of the sender address is 256
characters.
When the user login is set to ON, login user name, password and E-mail address of
login user are used for SMTP authentication and e-mail sender address.
Value
Use System Settings: Information set with [Sender Address] is used for SMTP
authentication and E-mail sender address information.
Use Login User Information: Login User information is used for SMTP
authentication and E-mail sender address information.
NOTE
If there is no e-mail address set for the user who logged in, the Sender Address set
with [Sender Address] is used for E-mail sender address information.
Select whether to receive E-mail using POP3.
Value: Off, On
Remote Printing (page 8-35)
Select whether to send documents using FTP. To use the FTP Client, set the protocol to [On] for
"Protocol Settings". The default port number is 21.
Value: Off, On, 1 to 65535 (Port Number)
Select whether to send documents using SMB. To use the SMB Client, set the protocol to [On] for
"Protocol Settings". The default port number is 445.
Value: Off, On, 1 to 65535 (Port Number)
Description
Description
8-31